Steamulation Sleeve Pro X Prime II – Epoxy Marble White

ACCESSORISE YOUR STEAMULATION SHISHA

This sleeve for your Pro X II hookah is made of epoxy glass. This sleeve can only be used in conjunction with an optional Blow Off Adapter

STEP ONE
To mount a sleeve, first unscrew the smoke column from the base. Now place the Steamulation Sleeve Upgrade Adapter with its flat side points upwards

STEP TWO
Now take an optional Steamulation Purge Adapter and guide it over the smoke column up to the 18/8 grind, where there is an outer cone that holds the adapter. Make sure that the adapter is mounted the right way round. Now put an optional sleeve over the smoke column and insert it into the centre of the Steamulation Purge Adapter.

STEP THREE
In the final step, please take the smoke column with the optional sleeve and purge adapter and put it through the Steamulation Sleeve Upgrade Adapter. Then screw the smoke column hand-tight to the base. It is advisable to first grasp the smoke column at the upper end and screw it into the thread a few turns. As soon as the smoke column engages in the thread, please pull the optional purge adapter upwards into the cone. The purge adapter and smoke column can then be easily tightened and loosened together. Caution: Make sure that your optional sleeve is securely centred in both adapters so that no foreign air escapes.

This Steamulation sleeve allows you to customise your Steamulation Pro X Prime (Gen. II) to the maximum. In addition to the optical individualisation, the use of a Pro X Prime (Gen. II) sleeve provides you with further blow off options.

You can use the sleeve with conventional Blow Off adapters or with the innovative X Blow Off system.

Steamulation Blow Off Control: in combination with a Steamulation Sleeve Upgrade Adapter + Steamulation Blow Off Adapter.

Steamulation X Blow Off: in conjunction with the X Blow Off Adapter Set.

Current compatibility: Steamulation Pro X Prime (Gen. II)